Navigating in the Home Screen Pages
To Press
Move to the other Home screen page
or
Return to Page 1 of the Home screen
at any time
Access the Speed Dial screen
The SpDial softkey
Access the Call Log Summary screen
The Log softkey
Access the Options screen
The Option softkey
Access the Label Action screen
The Label softkey
Call Appearance and Call Identification Displays
Your telephone has six call appearance/feature buttons per screen page. Beginning with the first button in the upper left corner
of the telephone and going down, the display identifies the buttons in the left column. These buttons are considered call
appearance/feature buttons 1 through 3. On the display, these buttons are identified by default labels a, b, c, etc., where a
represents call appearance/feature button 1. The buttons in the right column run from 4 through 6.
When you receive or make calls, the available call identification information is displayed where the date and time appear when
the telephone is idle. For example, when you dial an extension, that number is shown and then replaced by the called party’s
name and extension. The call identification information associated with an extension is provided by the call processing system.
When a call is received from another extension, the caller’s name is shown; when a call is received from outside, the calling
number (if available), “OUTSIDE CALL,” or a trunk identifier is shown.
One call appearance is usually underlined. When a call arrives at the telephone, the bell icon blinks on the corresponding call
appearance. After you answer the call, the active call icon is displayed.
Note: If the call appearance is not displayed on the current Home screen page, use
or to locate and answer the
appropriate call appearance.
The display remains in call handling mode until you activate one of the other softkey features. (When you press one of the
softkeys, the softkey labels are displayed.) After using any of these features, return to Page 1 of the Home Screen by pressing
.
Status Icons
The icons displayed on the call appearance/feature buttons of your telephone are explained in the following table. These icons
replace the functionality of the green LEDs and equivalent flash rates.
Icon Definition
Ringing
An incoming call is waiting to be answered.
Active
The call you are currently handling. If you have a bridged call
appearance on your telephone, this icon will appear when that
appearance is active.
On hold
A call currently on hold.
2410 Digital Telephone End User Guide | 6 | Page
To Next Page
Loading...
