1) Call appearance/feature buttons — For accessing incoming/outgoing lines and programmed features. An underscore
indicates the currently selected call appearance.
2) Display — This area shows status for the call appearances, information for a call, information provided by the Avaya call
server, and the Home, Speed Dial, Call Log, and Options screens.
3) Message lamp — This lamp is lit when a message has arrived in your voice mailbox. When you set this lamp to Visual Ring,
it flashes to alert you to incoming calls. You can retrieve messages using
.
4) Softkeys — These keys allow you to perform specific functions. The functions available and the corresponding softkey labels
change according to the screen displayed. To initially view softkey labels, press any softkey.
5) Message button — For retrieving messages.
6) Arrow keys
— Depending on the current screen display, you can use these keys to move between screen pages, to
cycle through Call Log and Speed Dial entries, and to move the cursor during data entry.
7) Call handling buttons — For call handling activities.
8) Dialpad — Standard 12-button pad for dialing telephone numbers.
9) Volume control buttons — For adjusting speaker, handset, headset, or ringer volume depending on which component is in
use.
10) Mute button
— For turning off the microphone (handset, headset, or speaker). When the Mute feature is active, the
associated light turns on and the person at the other end of the call cannot hear you.
11) Headset button
— For activating a headset connected to the 2410 headset jack. The light associated with this button
turns on when the headset is active.
12) Speaker button
— For accessing the built-in two-way speakerphone. The light associated with this button turns on
when the speakerphone is active.
13) Exit button
— Pressing this button returns you to the first page of the Home screen.
2410 Digital Telephone End User Guide | 4 | Page
To Next Page
Loading...
