3600 Series Wireless IP Phone Installation
3600 Series IP Phone Installation Page 32
IP Office 4.0 15-601082 Issue 05a (22nd May 2007)
Error Status
The Error Status screen displays any alarms that indicate some system malfunction. Some of these
alarms are easily remedied and others require a call to Avaya's Customer Support.
1. From the AVPP main menu select System Status.
2. Select Error Status.
3. The screen displays active alarms on the AVPP. The following table displays the list of alarms
and a description of the action to take to eliminate the alarm:
Alarm Text Action
Maximum payload usage reached Reduce usage, clear alarm
Maximum telephone usage reached Reduce usage, clear alarm
Maximum access point usage reached Reduce usage, clear alarm
Maximum call usage reached Reduce usage, clear alarm
SRP audio delayed Reduce usage, clear alarm
SRP audio lost Reduce usage, clear alarm
No IP address Configure an IP address
3. To clear all clearable alarms, press C.
To Next Page
Loading...
