Avaya 3735 - Pairing or connecting Bluetooth headset

Pairing or connecting Bluetooth headset
About this task
To use a Bluetooth headset, pair it first with the handset. It is only needed to pair the Bluetooth
headset once. A paired Bluetooth headset is automatically connected, as indicated by the
icon in front of the headset.
Procedure
1. Set the Bluetooth headset in pairing mode.
2. Enable Bluetooth.
3. Press Menu.
4. Select Connections > Bluetooth.
If you are already paired your Bluetooth headset to your handset.You need to select the
Bluetooth again to use without paring.
5. Select Headset.
6. Select Add new.
The system displays the Put headset in Pairing mode message.
7. Press OK.
The system searches for a Bluetooth headset connection.
8. When headset is found, press Pair.
9. (Optional) Enter the PIN code.
10. Press OK.
If the pairing is successful, the system displays Successful pairing. The Bluetooth
headset is connected and indicated by the Colored square ( ) in front of the headset.
11. To add another headset, perform steps 1–6.
Upto 8 headsets can be paired to the handset, but only one headset at a time can be
selected. The system displays the paired headsets by a default name in the handset menu
Headset.
Selecting a Bluetooth headset
Procedure
1. Press Menu.
2. Select Connections.
Configuring Bluetooth Headset
August 2019 Using 3735 DECT handsets with Communication Manager and IP Office 46
Comments on this document? infodev@avaya.com