Avaya 3735 - Making a call

Procedure
1. Press Menu.
2. Select Connections.
3. Select Headset.
4. Select one of the following :
• Mic on boom: Optimizes audio.
This option is the default setting.
• Hearing protection: Reduces the noise exposure level and the risk of hearing loss.
• Customized headset profile: Is visible if the headset profile is configured in WinPDM or
Device Manager.
5. Press Select.
Calling
Making a call
Procedure
1. Dial the number on the handset.
2. Press Call or the Off-hook key.
The system displays Transfer call to phone? message.
3. Do one of the following:
• To use the Bluetooth headset, press No or ignore the message.
• To use the handset, press Yes.
Answering a call
About this task
A ring signal sounds in both the selected Bluetooth headset and the handset to signal an incoming
call.
Procedure
Do any of the following:
• To answer the call in the Bluetooth headset, press the button on the headset.
Configuring Bluetooth Headset
August 2019 Using 3735 DECT handsets with Communication Manager and IP Office 48
Comments on this document? infodev@avaya.com