Avaya 3735 - Defining Handset Actions When Placed in Charger and in Call; Defining Handset Actions When Placed in Charger and Not in Call

3. Select System.
4. Select Priority.
5. Change the priority by using the navigation key to scroll up and down.
6. To save the priority, select Back.
Defining handset actions when placed in charger and in call
About this task
Use this procedure to define the functions of a handset when placed in a charger during a call.
Procedure
1. Press Menu.
2. Select Connections.
3. Select In charger.
4. Select Call behavior.
5. Select any of the following:
• No action: No action is performed when the handset is placed in a charger during a call.
• Loudspeaking: The loudspeaker is activated when the handset is placed in a charger
during a call.
• End call: The call is disconnected when the handset is placed in a charger.
Defining handset actions when placed in charger and not in call
About this task
Use this procedure to define the functions of a handset when the handset is not on a call and
placed in a charger.
Procedure
1. Press Menu.
2. Select Connections.
3. Select In charger.
4. Select Other actions.
5. Select any of the following:
• No action: No action is performed when handset is not in call and placed in charger.
• Change profile: When the handset is placed in the charger it changes profile. When the
handset is removed from the charger, the profile is changed back.
Troubleshooting
August 2019 Using 3735 DECT handsets with Communication Manager and IP Office 55
Comments on this document? infodev@avaya.com