Avaya 3735 - Voice mail; Receiving a voicemail

Mobile data
Sending mobile data
About this task
Mobile data can be used for:
• Opening a door
• Starting or stopping a machine
User entered data can be sent from the handset by pressing a pre-programmed Hot key or Soft
key, or selecting a Service.
Procedure
Data can be predefined or entered only after you:
• Press the Soft key, the Hot key, or select a Service.
Sending mobile data with a prefix
About this task
Mobile data with prefix can be used to send information to an application in the system.
The prefix is predefined by the user when programming the Hot key or Soft key or Service.
Procedure
To send the mobile data from the handset, enter the data and then press:
• A pre-programmed Hot key or Soft key, or select a Service.
Voice mail
Receiving a voicemail
About this task
When you receive a voicemail, it is indicated by the Voicemail message (
) icon in the status
bar, and the phone screen automatically displays the content of the voice mail notification.
Information is stored in the Messaging inbox until you listen to all the voicemail messages.
Procedure
1. To dial the voicemail, press Call.
2. (Optional) If you press Close, dial the voicemail by long pressing on digit key 1 in standby
mode or from the Inbox menu.
Managing messages
August 2019 Using 3735 DECT handsets with Communication Manager and IP Office 95
Comments on this document? infodev@avaya.com