• On if silent: The vibrator is on when the handset is muted.
• Off
5. Select vibrating alert.
6. Press Back to save the settings.
Note:
If the vibrator is activated, it vibrates for incoming calls and messages. The vibrator
can also be activated when receiving a message during a call.
Setting the key sound
Procedure
1. Press Menu.
2. Select Settings.
3. Select Sound & Alerts > Key sound.
4. Select one of the following:
• Silent
• Click
• Tone
5. Press Back to save the settings.
6. (Optional) Press Play to listen to a key sound before selecting it.
Keypad lock settings
The handset keypad can be locked automatically to minimize the risk of accidentally pressing keys
or buttons while the handset is not in use. The keypad is automatically locked after the lock time
defined by the Auto lock time parameter expires.
The administrator can configure the automatic key lock settings in the WinPDM or Device
Manager.
Note:
You can answer or end a call while the keypad is locked. You can call any one of the five
predefined emergency numbers while the keypad is locked if this feature is configured in the
WinPDM or Device Manager.
The alarm button can be pressed while the keypad is locked.
The user can also configure the automatic key lock settings as described in the following sections.
You can configure one of the following options for automatic key lock:
• On: Keypad is automatically locked if it is not used before the specified lock time expires.
Settings
August 2019 Using 3735 DECT handsets with Communication Manager and IP Office 109
Comments on this document? infodev@avaya.com
To Next Page
Loading...
