Chapter 6: Menu operation
Managing incoming calls
Incoming call
You get a call alert that is accompanied by a ring signal and / or a vibrating handset.
You can disable a ring signal and a vibrator. The handset number or name of the calling party is
shown. The name is shown if the handset number of the calling party is stored in the local phone
book.
Answering a call
Procedure
Do one of the following:
•
Press the Off-hook (
) or the Accept soft key.
•
Press
to answer the call using the speakerphone.
• Press the button on the Bluetooth headset to answer the call using the headset.
The name or number of the calling party is displayed if calling line information is available.
Note:
• When you enable Automatically, all incoming calls are connected automatically.
• If you decline the call, you can still acknowledge its receipt by sending a predefined text
message to the caller.
Declining a call
Before you begin
Your handset must ring.
August 2019 Using 3735 DECT handsets with Communication Manager and IP Office 57
Comments on this document? infodev@avaya.com
To Next Page
Loading...
