Procedure
Press the On-hook and On/Off ( ) key or the Decline soft key.
Ending a call
About this task
Some systems or PBXs require that the handset sends a DTMF in order to end a call.
Procedure
To end a call, press the On-hook and On/Off ( ) key.
Declining a call with a predefined message
About this task
To decline a call with a predefined message, both the caller and the call receiver must be
connected via an IP-DECT system.
Procedure
1. In response to the “Reply with a message template?” message prompt, press Yes to send
a message to the caller.
A list of predefined messages is displayed in the Templates menu.
2. Select a predefined message and, if required, edit the message.
3. Press Send.
The handset displays the callers number.
4. Press Send again to send the message.
The handset displays the Message sent confirmation when the message is sent to the
caller.
Answering a text message with a predefined message
Procedure
1. Press the soft key Reply.
2. Press the More soft key.
The Templates option is displayed.
3. Press the soft key Select.
Menu operation
August 2019 Using 3735 DECT handsets with Communication Manager and IP Office 58
Comments on this document? infodev@avaya.com
To Next Page
Loading...
