• Frequency band selection
• Factory reset option
To activate the Admin Menu, enter Settings > Device info > Software and press the buttons
containing CRAFT#, that is 27238#.
The Admin Menu disables after rebooting the handset.
For quick access to the Device Information (DI) menu in idle mode, press the keys containing
*#DI# (that is *#34#). For quick access to IPEI/IPDI, press *#06# in idle mode. See the table
below.
Information Code
Software version *#34#
Hardware version *#34#
IPEI/IPDI *#34# or *#06#
User ID *#34#
Clearing lists in charger
You can set a parameter through the WinPDM or Device Manager to clear messaging lists and call
lists that has been stored in the handset.
When the parameter is activated and the function has been downloaded to the cordless
telephone, the lists are deleted when located in a charger. This feature can be useful during
administration of handset for new users.
Troubleshooting
Operational problems
Fault
Probable cause Action or comment
No display The battery level is low or the
handset is defective.
Charge the battery or contact
system administrator.
Sound off is on, or ringer volume
set to silent, or the handset is
defective.
Table continues…
Menu operation
August 2019 Using 3735 DECT handsets with Communication Manager and IP Office 102
Comments on this document? infodev@avaya.com
To Next Page
Loading...
