• External call
• Call back
• Priority call
You can set different signals for internal calls, external calls, callback, and priority calls.
5. Select the ring signal.
6. (Optional) Press Play to listen to a ring signal before selecting it.
The ring signal is repeated until you press Stop.
7. Press Back to save the settings.
Note:
Additional ring signals can be selected if they are configured in the WinPDM.
Setting alerts for messages
Procedure
1. Press Menu.
2. Select Settings.
3. Select Sound & Alerts > Message alert.
4. Select a message alert from the list.
Press Play to listen to a message alert before selecting it.
Note:
The Play soft key is not available for Enhanced beep. Instead, send a message to the
handset to listen to the sound.
By default, the message volume follows the ring volume setting in the handset. However,
you can set the message volume to be different.
5. Press Back to save the settings.
Tip:
The option Custom sounds should be selected to create a customized message alert.
Setting the vibrator alert
Procedure
1. Press Menu.
2. Select Settings.
3. Select Sound & Alerts > Vibrator alert.
4. Select one of the following:
• On
Customizing Avaya 3735 DECT handset
August 2019 Using 3735 DECT handsets with Communication Manager and IP Office 108
Comments on this document? infodev@avaya.com
To Next Page
Loading...
