Avaya 3735 - Page 72

Procedure
1. Press More.
2. Select End Call.
The End Call option is visible only when it is configured in the handset.
3. Press Select.
The handset ends the current call and resumes the previous call.
Sending call waiting
About this task
Use this procedure to notify the engaged party that another call is trying to reach them.
Procedure
1. Press More.
2. Select Call waiting. The Call waiting function is visible, only if the administrator has
activated in the handset.
3. Press Select.
The engaged party receives a Call waiting signal.
When the line is free it automatically calls the number again. This is system dependent
function.
Answering call waiting
About this task
Use this procedure to answer call waiting when you:
• Receive a short tone for another incoming call during an ongoing conversation.
• Receive a beep from the handset and a text display: Internal call for internal callers and
External call for external callers. The handset also displays the name or the phone number
of the second caller.
Note:
You can use Answer call waiting function in two different ways depending on the system
setup and configuration.
Procedure
During a call, you receive a short tone. To answer the second call, do the following:
1. Press More.
2. Select Answer call waiting.
3. Press Select.
You connect to the new call and the first call is put on hold. When the line is free, the call
on hold is automatically dialled again. This is a system dependent feature.
Menu operation
August 2019 Using 3735 DECT handsets with Communication Manager and IP Office 72
Comments on this document? infodev@avaya.com