Avaya 3735 - Page 74

Procedure
Do any of the following:
• Press a Multifunction button, Soft key, Hot key, or a Navigation key and define it as a
shortcut to a Phone call ( ) function. When you press a key or a button, a predefined number
is called.
The support for a Multifunction button, depends on the model of handset used.
•
When receiving a call, press the soft key
. The Soft key might have another or no function
depending on its configuration of the In call function in WinPDM or Device Manager.
•
During a call, press the soft key
. The Soft key might have another or no function depending
on its configuration of the In call function in WinPDM or Device Manager.
• During a call, put the handset in a charger. Requires that the Loudspeaking function is chosen
in the In Charger menu.
• This function can also be activated by selecting another answering method, that is,
Automatically and or Loudspeaking.
Sending data
About this task
Sent data can be used to initiate actions such as:
• Opening a door.
• Starting and stopping a machine.
Procedure
To send user entered data from the handset, do any of the following:
• Press pre-programmed hot key.
• Press pre-programmed soft key.
• Select a service.
The data can either be predefined, entered after the hot key or soft key is pressed, or send
when the relevant service is selected.
Menu operation
August 2019 Using 3735 DECT handsets with Communication Manager and IP Office 74
Comments on this document? infodev@avaya.com