9. Enter a value (for example, a number), and then press Back.
10. Select Control question and press Select. The default is Off.
11. Press Back.
12. Press Save.
Defining hot keys
Procedure
1. Press Menu.
2. Select Shortcuts.
3. Select Hot keys.
4. Select from 2 to 9.
5. Select Function.
6. Select a function from list, and then press Back.
7. Select Value (only for some of the functions), and press Select.
8. Enter a value (for example, a number), and then press Back.
9. Select Control question and press Select. The default is Off.
10. Press Save.
Defining navigation keys
Procedure
1. Press Menu.
2. Select Shortcuts.
3. Select Navigation keys.
4. Select any of the following:
• Up
• Down
• Left
• Right
5. Select Function and press Select.
6. Select a function from the list, and then press Back.
7. Select Value (only for some of the functions), and press Select.
8. Enter a value (for example, a number), and then press Back.
9. Select Control question and press Select. The default is Off. Press Back.
If the control question is enabled, the system displays the message: Press “Yes” to
proceed.
Managing shortcuts
August 2019 Using 3735 DECT handsets with Communication Manager and IP Office 83
Comments on this document? infodev@avaya.com
To Next Page
Loading...
