Note:
Changing settings is not possible on a handset which is set to a profile. You have to leave the
profile before.
You can access profile from the menu by selecting Profiles > Select.
Adding a new profile
Procedure
1. Press Menu.
2. Select Profiles.
3. To add a new profile, select Add new.
4. Enter the name for the new profile, and then press Save.
5. To add settings to the profile, press More > Add setting.
6. Select the setting you want to add to the profile.
Repeat steps 6-7 if you want to add additional settings.
7. (Optional) To add settings by importing from an available profile, press More > Import
from, and then select the available profile.
8. Mark the required setting and press Edit to make the changes.
Activating a profile
Procedure
1. Press Menu.
2. Select Profiles.
3. Select a profile from the list to activate it.
When a profile is activated, the Profile active (
) icon and the name of the profile are
displayed in idle mode.
Deleting a profile
Procedure
1. Press Menu.
2. Select Profiles.
3. Select the profile that you want to delete, and then press More.
4. Select Delete from the menu, and then press Yes.
Editing a profile
Procedure
1. Press Menu.
Managing profiles
August 2019 Using 3735 DECT handsets with Communication Manager and IP Office 97
Comments on this document? infodev@avaya.com
To Next Page
Loading...
