Telephone settings
163
Configuring the time and date
Use the time and date option to configure the time and date.
Configuring the time
To configure the time, perform the following steps:
WARNING
You must charge your handset before you configure the
handset time and date. Each time you remove the
battery pack or switch the handset off it loses the time
and date information; you must manually reset it after
you reinstall the battery pack or switch the handset off
and on.
If your system can provide the date and time information
to DECT handsets, the date and time settings update
automatically when you switch on the handset. Contact
your system administrator to determine if you can use
this feature.
1. Open the General settings menu using the steps in
“Accessing the General settings menu” (page 159).
2. Press the Up or Down key to highlight the Time &
Date option.
3. Press the Select soft key.
4. Press the Up or Down key to highlight the Time
option.
5. Press the Select soft key.
6. Use the Dialpad to edit the time.
To Next Page
Loading...
Need help?
General
