Call features
63
Answering a call in Normal mode
To answer a call in Normal mode, perform the following step:
Answering a second incoming call
When the handset is busy and a second call comes in, you will hear a
ticker tone and the display shows “waiting” and the number or name of
the calling party (call waiting display indication is applicable only to SIP
DECT).
To answer a second incoming call, perform the following step:
Press the * (for SIP DECT) or R (for Traditional DMC-based DECT) key.
The call will be answered in the same way (Loudspeaker on or off) as the
currently established call. By means of the * (SIP DECT) or R (DMC-
based DECT) key, you can toggle between
the two calls. It behaves in a similar way as having a call on hold.
Note: If you end one of the calls, the handset will go on hook and
then you will automatically get an incoming call from the other party.
Attention: Answering a second call is possible only if
Call Waiting feature is configured on your communication
system.
v
1. Press the Call key (Loudspeaker is off).
OR
Press the OK key (Loudspeaker is on).
To Next Page
