Avaya 8410B - Ringer Volume; Select Ring

To change a regular call into a priority call:
1. Press
Priority
.
2. Wait for the called party to answer.
Note: If you still receive a call waiting ringback tone, wait a few minutes and try again.
To adjust the ringer volume (speaker is not active):
1. To raise the volume, press the right half of the Volume control button. To lower the volume, press the left half of
the Volume control button.
{
The display shows the current volume level.
On the display, one arrow indicates the lowest setting, and eight arrows indicate the highest setting.
{
One full ring cycle sounds to demonstrate the new volume.
Note: There are eight possible volume settings.
To select a personalized ringing pattern:
1. Press
Ring
while on-hook.
{
The red light next to
Ring
winks.
{
The current ringing pattern plays and repeats every three seconds.
2. Continue to press (and then release)
Ring
to cycle through all eight ringing patterns.
{
The red light next to
Ring
continues to wink.
3. If you want to save the ringing pattern currently being played, do not press
Ring
anymore. You hear the selected
ringing pattern two more times, then it is automatically saved.
{confirmation tone}
{
The red li
g
ht next to
Rin
g
g
oes off.
Ringer Volume
Select Ring
Pa
g
e 19 of 31Guide Builder Document
7/24/2005file://C:\Pro
g
ram Files\
g
builder32\win\~5334240.htm