Avaya 8410B - Leave Word Calling

1. Press
LastDialed
while on-hook or off-hook.
or, Dial the Last Number Dialed code
#10
while on-hook or off-hook.
To leave a message after dialing an extension:
1. Press
LWC
before hanging up your handset.
{confirmation tone}
{
The Message light goes on at the called telephone (if so equipped).
Note: If a reorder tone is heard, the message is not stored; try again.
To leave a message without ringing an extension:
1. Press
LWC
while on-hook or off-hook.
or, Dial the Leave Word Calling code
*33
while on-hook or off-hook.
{dial tone}
2. Dial the extension.
{confirmation tone}
{
The Message light goes on at the called telephone (if so equipped).
3. Hang up or press
Drop
.
To cancel a Leave Word Calling message:
Note: You cannot cancel a message left for an AUDIX subscriber.
1. Press
Cancel LWC
while on-hook or off-hook.
or, Dial the Leave Word Calling Cancel code
#33
while on-hook or off-hook.
{dial tone}
2. Dial the extension.
Leave Word Calling
Pa
g
e 17 of 31Guide Builder Document
7/24/2005file://C:\Pro
g
ram Files\
g
builder32\win\~5334240.htm