Avaya 8410B - Page 16

To make a call to your intercom partner:
1. Press
IcomAuto xxx
while off-hook.
{ringback tone}
{
A special intercom ring is sent.
Note: If the call is unanswered and you want to redirect it to coverage, press Go to Cvr while the call is ringing.
To make a call to a member of your group:
1. Press
IcomDial xxx
while off-hook.
{dial tone}
{
The green light goes on steadily.
2. Dial your group member's 1- or 2-digit code.
{ringback tone}
{
A special intercom ring is sent.
Note: If the call is unanswered, and you want to redirect it to coverage, press Go to Cvr while the call is ringing.
To answer an intercom call:
1. Pick up the handset.
{
You are connected to the call.
If you are active on another call, first press
Hold
, then press the flashing call appearance button. To return to the
call on hold, press its call appearance button.
To automaticall
y
redial the last number dialed:
Intercom (Automatic/Dial)
Last Number Dialed (Redial)
Pa
g
e 16 of 31Guide Builder Document
7/24/2005file://C:\Pro
g
ram Files\
g
builder32\win\~5334240.htm