Avaya 8410B - Transfer; Send the Present Call to Another Number

1. Press and hold
Test
while on-hook or off-hook.
{
The green light next to
Test
goes on.
Note: If the green light next to Test flashes rather than goes on steadily, it means the telephone is not communicating with the switch. In such a case, see your
system manager.
{
The lights go on steadily in four groups, and all the display segments fill in.
2. To end the test, release
Test
.
{
The lights return to their pretest state.
{
The green light next to
Test
goes off.
Note: If the display or the lights do not respond during the test, notify your system manager.
To send the present call to another number:
1. Press
Transfer
.
{dial tone}
{
The present call is put on hold.
{
The green light flutters.
{
You are given a new call appearance button.
2. Dial the number to which the call is to be transferred.
{ringback tone}
3. Remain on the line and announce the call. If the line is busy or there is no answer, return to the call on hold by
pressing its call appearance button.
4. Press
Transfer
again.
{
The call is sent to the dialed number.
5. Hang up.
Transfer
Pa
g
e 24 of 31Guide Builder Document
7/24/2005file://C:\Pro
g
ram Files\
g
builder32\win\~5334240.htm