to store as items on your personal list(s).
Note: Each phone number or feature code is stored as a separate list item.
2. Pick up the handset.
{dial tone}
3. Press
Program
.
or, Dial the Program code
*49
.
{dial tone}
4. Dial the Personal List number (1, 2, or 3).
{dial tone}
5. Dial the list item (1, 2, 3...).
{dial tone}
6. Dial the number you want to store (up to 24 digits).
Note: If you are programming an outside number, be sure to include a trunk code, if applicable.
7. Press
#
.
{confirmation tone}
{
The number is stored.
8. If you want to store additional items on the same list, repeat Steps 5 through 7. If you want to store items on
another list, press
Drop
and return to Step 1.
9. Hang up or press
Drop
to end programming.
Note: Keep a record of your personal list items; group, system, and enhanced lists can be obtained from your system manager.
To place a call using an AD list:
1. Press
Pers List
,
Grp List
, or
Sys List
.
{dial tone}
or, Dial the appropriate Abbreviated Dialing List code:
List 1
*50
List 2
*51
List 3
*52
Pa
e 9 of 31Guide Builder Document
7/24/2005file://C:\Pro
ram Files\
builder32\win\~5334240.htm
To Next Page
Loading...
