• Press the right or left navigation arrow.
Set to On to set the headset receive volume louder or set to Off to set the
headset receive volume softer. The default setting is Off.
g. To turn the Headset CC option on or off, scroll to this option, and then do one
of the following:
• Press the Change softkey.
• Press the OK button.
• Press the associated call appearance/feature button.
• Press the right or left navigation arrow.
Set to On to enable the call center audio mode or set to Off to disable the call
center audio mode. The default setting is Off.
h. To turn the Handset Xmit NR option on or off, scroll to this option, and then do
one of the following:
• Press the Change softkey.
• Press the OK button.
• Press the associated call appearance/feature button.
• Press the right or left navigation arrow.
Set to On to enable handset transmit noise reduction or set to Off to disable
handset transmit noise reduction. The default setting is On.
7. Press the Save softkey to save your changes.
8. To change the setting of another audio option, repeat Steps 3 through 7.
Setting the Remote Headset option
About this task
If you want to make and answer calls using a wireless headset, turn this option on. This allows
you to hear the DTMF tones on your wireless headset. You can use the wireless headset button
or the Headset button on the telephone to make and answer calls using the headset.
When this option is turned off, you are still able to make and answer calls using your wireless
headset, but you cannot hear the DTMF tones. In addition, you can use only the wireless
headset button to make and answer calls, not the Headset button on the telephone.
Note:
This feature is currently supported only by the wireless Plantronics Savi
™
Office headset.
Other wireless headsets are not supported. Unless you are using the wireless Plantronics
Using the Avaya Home menu
48 Avaya 9400 Series Digital Deskphone User Guide August 2011
Comments? infodev@avaya.com
To Next Page
Loading...
