If you want to ignore the call, tap Ignore.
2.
To end the call, press the Phone On-hook/Off-hook button.
Answering a call while on another call
You can answer another incoming call when you are on a call without dropping the first call.
For example, you are on a call with A. You get an incoming call from B. The status indicator LED
starts flashing blue.
The screen displays the calling party number and the following options:
• Answer Hold
• Answer Drop
• Ignore
Procedure
1. To answer the call from B and put A on hold, tap Answer Hold.
2. To answer the call from B and drop the call from A, tap Answer Drop.
3. To ignore the call from B and continue the call with A, tap Ignore.
The conference phone stops ringing. However, the status indicator LED keeps flashing blue
as long as B keeps calling.
Placing an active call on hold
You can place an active call on hold if you want to make another call, or if you want to do something
else before rejoining the call back again.
Before you begin
You must be on an active call.
Procedure
1.
To place an active call on hold, tap the Hold icon on the touch screen.
The status indicator LEDs start flashing red indicating that the call is placed on hold.
2.
To resume the call, tap the Hold icon again.
The status indicator LED turns blue indicating that the call is active again.
Handling calls
18 Using Avaya B189 IP Conference Phone May 2015
Comments on this document? infodev@avaya.com
To Next Page
Loading...
