Muting a participant on a conference call on page 21
Dropping a participant on a call on page 21
Muting a participant on a conference call
Before you begin
You must have an ongoing conference call.
About this task
You can mute any participant on a conference call. This action does not mute the other participants.
Note:
You can mute a participant only if your administrator has enabled the feature for your extension.
Procedure
1. On the conference screen, tap Details.
The phone displays the conference details screen with the list of the participants.
2.
To mute a participant, tap the Mute
icon.
3.
To unmute the participant, tap the Unmute icon.
Related Links
Viewing details on a conference call on page 20
Dropping a participant on a call
Use this feature to drop a participant on a conference call.
Before you begin
You must have an active conference call with at least three participants on the conference call.
Note:
You can drop a participant only if the administrator has enabled this feature for your phone. The
feature only works if the participant is over a non-IP phone.
Procedure
1. On the conference screen, tap Details.
The phone screen displays the names of all the participants on the call.
2.
Tap the Drop participant
icon next to the participant entry.
The phone screen displays the confirmation prompt.
3. Tap Yes.
Viewing details on a conference call
May 2015 Using Avaya B189 IP Conference Phone 21
Comments on this document? infodev@avaya.com
To Next Page
Loading...
