Chapter 6: Settings
Pairing contacts to calls
About this task
You can configure the conference phone to display contact names for incoming calls from the
numbers in the contacts list.
Procedure
1. Tap Settings.
The phone displays the Settings screen.
2. Tap Call Settings.
The phone displays the current settings.
3. Tap Pair Contacts to calls.
The phone changes the setting from On to Off or Off to On.
4. Tap Save to save the new setting.
Enabling and disabling the edit dialing mode
About this task
You can edit the last dialed number by enabling the Edit Dialing mode.
Procedure
1. Tap Settings.
The conference phone displays the Settings screen with the available options.
2. Tap Call Settings.
• Tap Edit Dialing once to enable.
• Tap Edit Dialing again to disable.
November 2020 Using Avaya B189 IP Conference Phone 29
Comments on this document? infodev@avaya.com
To Next Page
Loading...
