Adjusting the microphone volume for a PA box setup
About this task
You can adjust the microphone volume from an external microphone mixer using the built in VU
(volume unit) meter while making a call. You do not need access to the administration menu.
Before you begin
Ensure that the external microphone is connected.
Procedure
1. Make a call.
2. Tap Settings.
3. On the Settings menu, tap Network Info .
4. On the network information screen, tap Audio Parameters .
5. Scroll down and tap the VU meter.
6. Adjust the volume level to an average of –20 dB.
The red dot next to the dB value indicates the input signal.
Settings
November 2020 Using Avaya B189 IP Conference Phone 32
Comments on this document? infodev@avaya.com
To Next Page
Loading...
