No. Task Description Notes
communicate with the Equinox
Streaming and Recording
Manager.
network each device uses
to communicate with the
Equinox Streaming and
Recording Manager. This
forces the proper
communication path to and
from the Equinox
Streaming and Recording
Manager no matter which
IP the Equinox Streaming
and Recording Manager
uses to communicate with
the Equinox Streaming
and Recording device.
7 Register each of the
components with the main
server.
Registering each of the
components on page 61
8 On the delivery node (DN),
configure the parent delivery
node.
Configuring delivery nodes on
page 64
9 On the conference point (CP),
configure the gatekeeper IP
and source DN.
Configuring conference points on
page 70
10 On Equinox Streaming and
Recording, configure the
network address for device
communication.
Specifying polling intervals and
the network address on
page 72
11 Register Equinox Streaming
and Recording with Equinox
Management.
Adding and Modifying Recording
and Streaming servers in
Scopia
®
Management on
page 73
12 Configure the Avaya Equinox
Recording Gateway.
Configuring the Avaya Equinox
Recording Gateway on page 76
Physically connecting the new server
Before you begin
You require a keyboard, a mouse, and a monitor. You also require several IP addresses and up to
six category 5e LAN cables. Ensure that you received the following items with your Avaya Equinox
Streaming and Recording Server (Equinox Streaming and Recording):
• Power cords
Installing the new streaming and recording server
August 2017 Installing the Avaya Equinox Streaming and Recording Server 26
Comments on this document? infodev@avaya.com
To Next Page
Loading...
