Avaya Equinox - Running the Configuration Utility to Configure a VDN; Running the Configuration Utility to Configure a SAN

To Next Page

To Previous Page

Running the configuration utility to configure a VDN

The Avaya Equinox Streaming and Recording Server Configuration Utility launches automatically

when the operating system is loaded for the first time. You can also run the configuration utility at

any time from the Start menu or from the desktop shortcut.

About this task

This task describes how to configure a VDN using the configuration utility provided as part of the

Equinox Streaming and Recording package.

Procedure

1. On the Equinox Streaming and Recording host server (which contains the DN), run the

configuration utility and select Perform Maintenance Tasks.

If you are installing Equinox Streaming and Recording for the first time, follow the steps in

Configuring the new server on page 47.

2. Click Next.

The Equinox Streaming and Recording Configuration Utility runs in the normal way. If the

server includes a DN, the Equinox Streaming and Recording Configuration Utility displays

the Virtual Delivery Node (VDN) installation screen.

You should only use a VDN if you subscribe to the Highwinds Content Delivery Network

(CDN). CDN is a cloud-based streaming system.

3. Select Install a Virtual Delivery Node (VDN) on this server.

4. Click Next and Next again.

5. On the Finish Configuration screen, click Finish.

Next steps

Return to your checklist to see your next task.

Related product manuals