Avaya Equinox - Setting the IP Address of the Recording Component (Conference Point)

No. Task Description Notes
1 Set the IP address of each of
the remaining components.
You have already set the IP
address of the Equinox
Streaming and Recording
Manager.
Setting the IP address of the
recording component (Conference
Point) on page 52
Setting the IP address of the
delivery component (Delivery
Node) on page 56
2 Restart services. Restarting services on page 57
3 Apply the license to each of the
components.
Applying the license to the
management component on
page 57
Applying the license to the
recording component (Conference
Point) on page 58
Applying the license to the delivery
component (Delivery Node) on
page 58
You must apply
the license to
all components.
Related links
Setting the IP address of the recording component (Conference Point) on page 52
Setting the IP address of the delivery component (Delivery Node) on page 56
Restarting services on page 57
Applying the license to the management component on page 57
Applying the license to the recording component (Conference Point) on page 58
Applying the license to the delivery component (Delivery Node or Virtual Delivery Node) on
page 58
Setting the IP address of the recording component (Conference
Point)
The recording component is known as the conference point or CP.
About this task
You should set an IPv4 address.
Before you begin
Obtain the Avaya Equinox Streaming and Recording Server license keys from the Avaya Product
Licensing and Delivery System (PLDS).
Procedure
1. Double-click on the Hyper-V Manager shortcut on the desktop.
2. In the Virtual Machines panel, double-click on the CP entry.
Installing the new streaming and recording server
August 2017 Installing the Avaya Equinox Streaming and Recording Server 52
Comments on this document? infodev@avaya.com