Figure 10: Hyper-V Manager
3. Log in to the Conference Point (CP) on the console as admin.
The default password is admin.
If this is the first time that you have logged into the CP, you are prompted to change your
password.
4. (Optional) If you are using DHCP, retrieve your IP address and make a note of it.
a. Run ifconfig.
b. Look at inet addr for eth0.
Licensing checklist
August 2017 Installing the Avaya Equinox Streaming and Recording Server 53
Comments on this document? infodev@avaya.com
To Next Page
Loading...
