Procedure
1. On the Equinox Streaming and Recording host server (which contains the DN), run the
configuration utility and select Perform Maintenance Tasks.
If you are installing Equinox Streaming and Recording for the first time, follow the steps in
Configuring the new server on page 47.
2. Click Next.
The Equinox Streaming and Recording Configuration Utility runs in the normal way. If the
server includes a DN, the Equinox Streaming and Recording Configuration Utility displays
the External Storage Configuration screen, after the Virtual Delivery Node (VDN)
installation screen.
3. On the External Storage Configuration screen, select Enable external storage for the
Delivery Node.
4. (Optional) Enter the IP address and netmask.
This enables you to assign a new IP in the Windows host on the SAN network so that you
can open a browser on the server and access the SAN administration console. You should
not enter the SAN IP address here.
5. Click Next.
6. On the Finish Configuration screen, click Finish.
The Equinox Streaming and Recording Configuration Utility now performs multiple
configuration steps to prepare the Windows host server and DN virtual machine for SAN
networking. The DN virtual machine is stopped and re-started as part of this process. This
process interrupts service.
7. On the Complete Configuration screen, click View Addresses to display the MAC addresses
of the Equinox Streaming and Recording server.
Next steps
Return to your checklist to see your next task.
Related links
Configuring the new server on page 47
Licensing checklist
Follow the steps in this checklist to license the Avaya Equinox Streaming and Recording Server
(Equinox Streaming and Recording).
Licensing checklist
August 2017 Installing the Avaya Equinox Streaming and Recording Server 51
Comments on this document? infodev@avaya.com
To Next Page
Loading...
