Table 10: Advanced Options
Field Description
Distribute All Programs Select to take all the programs in the system
from other source nodes and copy them to this
delivery node.
Replace with new DN Use this setting when bringing on a replacement
delivery node for an older or broken system.
Synchronize Select to ensure that all programs are distributed
to their assigned delivery nodes. Only perform
this step if programs have indicated failure or
pending for some time.
When you click Synchronize, Equinox
Streaming and Recording attempts to complete
any failed or pending distributions for a given
DN. You can check the progress of the
synchronization by checking the DN program
listing on the Delivery Node screen. This feature
is useful when adding a new DN, or moving an
existing DN within a DN hierarchy. The programs
are not updated until you click Synchronize .
You may also want to click Synchronize if a
delivery node has been offline for some time and
needs to synchronize programs that have
occurred during this time.
8. Click Save.
Related links
Identifying the master delivery node on page 68
Identifying the master delivery node
About this task
You can assign master delivery node status to a delivery node when you add it to the Equinox
Streaming and Recording deployment. In a deployment with many delivery nodes, you may need to
check which delivery node is the master delivery node.
A master DN is a delivery node which permanently holds all content. Typically, you assign master
status to the DN with the largest storage capacity. If your deployment only contains a single DN, that
DN is automatically added as the master DN.
Procedure
1. Log in to Equinox Streaming and Recording.
2. Select the Devices tab.
3. From the Browse menu on the left, click Delivery Nodes.
Installing the new streaming and recording server
August 2017 Installing the Avaya Equinox Streaming and Recording Server 68
Comments on this document? infodev@avaya.com
To Next Page
Loading...
