Avaya ESS

ESS Installation
100 Avaya Enterprise Survivable Servers (ESS) Users Guide
11. Main server: Install the
RFA license and
authentication file.
If the license file contains a
new module ID or if the
module ID has changed,
you must:
● Use the Bash
command, server
-z
● Use the SAT
command reset
system 4
After loading the license
file, verify that the ESS
Administration feature is
turned on.
To install the license and
authentication file see:
● Installing and Configuring
the S8500 Media Server
(03-300143), or
● Installing and Configuring
the S8700 Series Media
Server (03-300145).
To verify that the ESS
Administration feature is turned
on see:
Avaya Enterprise Survivable
Servers (ESS) Users Guide, ESS
Server License Files on
page 110.
12. IPSIs: Change the
dynamic IP address to a
static IP address
In an ESS environment, all
IPSI’s must have a static IP
address.
To change the IPSI from a
dynamic IP address to a static IP
address see:
● Installing and Configuring
the S8500 Media Server
(03-300143), or
● Installing and Configuring
the S8700 Series Media
Server (03-300145).
Table 10: Installing ESS with existing servers (continued)
Task Information Documentation
7 of 10