Avaya ESS

ESS Installation Checklist
Issue 1.1 June 2005 107
7. ESS server: Verify
that the ESS
server can
communicate with
the customer’s
LAN interface
An IP address of a CLAN
was entered when you
configured the ESS server.
The CLAN is used when
the ESS server registers
with the Main server for the
first time and may be used
for subsequent
registrations.
To verify that the ESS
server can communicate
with the customer’s LAN
interface:
On the ESS server, use the
ping command followed
by the IP address of the
CLAN
For information on how to
use the ping command,
see:
● Installing and
Configuring the S8700
Series Media Server
(03-300145), or
● Installing and
Configuring the S8500
Media Server
(03-300143).
8. ESS server: Verify
that the ESS
server can
communicate with
the Main server
over the IP network
To verify that the ESS
server can communicate
with the Main server:
On the ESS server, use the
ping command followed
by the IP address of the
Main server
For information on how to
use the ping command,
see:
● Installing and
Configuring the S8700
Series Media Server
(03-300145), or
● Installing and
Configuring the S8500
Media Server
(03-300143).
Table 11: Installing ESS with new servers (continued)
Task Information Documentation
4 of 7