Avaya ESS

ESS Installation
108 Avaya Enterprise Survivable Servers (ESS) Users Guide
9. Main server:
Install the Main
server hardware
and load
Communication
Manager 3.0 or
later.
In an ESS environment,
you must use static IP
addresses for the IPSIs in
the configuration.
To install the server
hardware, see:
● Quick Start for
Hardware Installation:
Avaya S8500 Media
Server (555-245-701),
or
● Quick Start for
Hardware Installation:
Avaya S8700 Series
Media Server
(555-245-703).
To load Communication
Manger, see:
● Installing and
Configuring the S8500
Media Server
(03-300143), or
● Installing and
Configuring the S8700
Series Media Server
(03-300145).
10. Main server:
Install the license
and authentication
file
After installing the license
file:
● Perform a reset
system 4 on the
server’s SAT.
● Verify that the ESS
Administration
feature is turned on.
To install the license and
authentication file see:
● Installing and
Configuring the S8500
Media Server
(03-300143), or
● Installing and
Configuring the S8700
Media Server
(03-300145).
To verify that the ESS
Administration feature is
turned on see:
Avaya Enterprise Survivable
Servers (ESS) Users Guide,
ESS Server License Files
on
page 110.
Table 11: Installing ESS with new servers (continued)
Task Information Documentation
5 of 7