Avaya IX CU360 - Chapter 3: Setting up Avaya IX CU360; Checklist for Setting up Avaya IX CU360; Pairing the Remote Control Unit with Avaya IX CU360

Chapter 3: Setting up Avaya IX CU360
Checklist for setting up Avaya IX CU360
No. Task Description Notes
1 Set up the Avaya IX
CU360 hardware.
See Avaya CU360 Collaboration
Unit Quick Start Guide
—
2 Pair the Avaya IX
CU360 remote control
unit.
Pairing the remote control unit
with Avaya IX CU360 on
page 16
—
3 Turn on Avaya IX
CU360.
Press the power key on the
Avaya IX CU360 remote control
unit.
—
4 Configure basic settings Configure the basic settings:
• Automatically: Configuring
Avaya IX CU360
automatically on page 18
• Manually: Configuring Avaya
IX CU360 manually on
page 18
You can use one of the
following interfaces to
configure settings:
• The Avaya IX CU360
remote control unit.
• The Avaya IX CU360
web interface
• Avaya Scopia
®
Control using an iOS-
based device
Pairing the remote control unit with Avaya IX CU360
Before you begin
Insert two AAA batteries in the remote control unit.
Procedure
1. Remove the power cable plug of Avaya IX CU360 from the power socket.
March 2019 Using Avaya IX Collaboration Unit CU360 16
Comments on this document? infodev@avaya.com