Avaya IX CU360 - Chapter 3: Navigation

2. On the remote control unit, simultaneously press the following two keys until the small blue
LED indicator on Avaya IX CU360 flashes:
• Back
• OK
3. When the LED indicator is flashing, insert the power cable plug of Avaya IX CU360 in the
power socket.
Ensure that the remote control unit is in proximity to Avaya IX CU360 when you insert the
power cable.
Result
The LED indicator of the remote control unit stops flashing to indicate successful pairing with
Avaya IX CU360.
Logging in to the Avaya IX CU360 web interface
About this task
The home page of Avaya IX CU360 displays the IP address of the endpoint on the top.
Change the default login credentials when you log in to the web interface for the first time.
Procedure
1. In a web browser, navigate to the IP adress of Avaya IX CU360.
Avaya IX CU360 displays the login page.
2. Enter the following:
• User Name: The default user name is Admin.
• Password: The default password is 1234.
• Language: Select a language from the drop-down list. This field is optional.
3. Click Login.
Configuration of Avaya IX CU360 basic settings
Avaya IX CU360 supports two methods to configure the basic settings:
• Manual configuration using the quick setup wizard.
• Automatic configuration using a service code. The administrator must provision Avaya IX
CU360 for automatic configuration and to send the service code to users. When users switch
on Avaya IX CU360 for the first time, it prompts users to enter the service code, after which
the basic settings are automatically configured.
Logging in to the Avaya IX CU360 web interface
March 2019 Using Avaya IX Collaboration Unit CU360 17
Comments on this document? infodev@avaya.com