Configuring the Avaya IX CU360 advanced calling options
About this task
Configure advanced settings of calls for new dial strings.
Procedure
1. Do one of the following:
• On the endpoint main menu, click the down arrow next to Call.
• On the web interface, click Make your Call > Advanced Options > Direct Call.
Avaya IX CU360 displays the Advanced Calling Options window.
2. Configure the following fields:
• Call Protocol
• Call Type
• Call Rate (Kbps)
3. Click Done.
Advanced Calling Options field descriptions
Name
Description
Call Protocol The protocol to use in calls.
The options are:
• H.323: The protocol for calls to H.323–based
endpoints, such as Avaya endpoints, and for
meetings that are hosted on Avaya Scopia
®
Elite
6000 MCU and Avaya Equinox
®
Media Server.
• SIP: The protocol for calls to SIP-based
endpoints.
• ISDN: The protocol for calls to ISDN-based
endpoints. Calls to ISDN-based endpoints need
an ISDN gateway, such as Avaya Equinox
Gateway for ISDN.
Call Type The type of the call.
The options are:
• Audio-Video
• Audio-Only
Table continues…
Setting up Avaya IX CU360
March 2019 Using Avaya IX Collaboration Unit CU360 22
Comments on this document? infodev@avaya.com
To Next Page
Loading...
