Avaya IX CU360 - Configuring Avaya IX CU360 to Verify before Disconnecting Calls

Avaya IX CU360 displays a window to enter PIN.
3. Do the following to set PIN:
a. Enter the current PIN. The default PIN is 1234.
b. Enter the new PIN.
4. On the web interface, click Save.
Configuring Avaya IX CU360 to verify before
disconnecting calls
About this task
Configure Avaya IX CU360 to ask for confirmation before disconnecting calls to prevent accidently
disconnecting calls.
Procedure
1. Do one of the following:
• From the endpoint, click Configure > Calling.
• From the web interface, click Basic Settings > Call-Answer mode > General.
2. Configure Confirm Disconnection to Yes.
3. On the web interface, click Save.
Configuring Avaya IX CU360 to verify before disconnecting calls
March 2019 Using Avaya IX Collaboration Unit CU360 31
Comments on this document? infodev@avaya.com