Avaya IX CU360 - Calling Field Descriptions; Configuring Meeting Recording in Avaya IX CU360

Calling field descriptions
Name Description
Automatic Answer Automatically answer incoming calls. The behavior
of this feature depends on the configuration.
The options are:
• Yes always: Avaya IX CU360 automatically
answers all incoming calls. If the endpoint
interface is on the home page, Avaya IX CU360
does not prompt you before automatically
answering calls.
• Yes trusted always: Avaya IX CU360
automatically answers all incoming calls from
trusted contacts. If the endpoint interface is on the
home page, Avaya IX CU360 does not prompt
you before automatically answering calls.
• Never: Avaya IX CU360 does not automatically
answer calls.
Answer after (Rings) The option to configure a specific number of rings
after which Avaya IX CU360 automatically answers
calls.
This optional field is active only if you configure
Automatic Answer.
Configuring meeting recording in Avaya IX CU360
About this task
Avaya IX CU360 saves meeting recordings in the MP4 format. The video stream is recorded in the
H.264 format, while the audio stream is recorded in the AAC-LC format.
You can save meeting recordings on a USB device or on the enterprise network. When you save
recordings on a USB device, you can transfer the recordings to an external server, such as a
generic FTP server or Avaya Equinox
®
Streaming and Recording Server. To save recordings on
the enterprise network:
• The Avaya Equinox
®
Conferencing deployment must have a recording server.
• The Avaya IX CU360 endpoint must be managed by Avaya Equinox
®
Management, and
Avaya Equinox
®
Management must have remote access to the endpoint.
• The meeting must be hosted on Avaya Scopia
®
Elite 6000 MCU or Avaya Equinox
®
Media
Server.
Calling field descriptions
March 2019 Using Avaya IX Collaboration Unit CU360 25
Comments on this document? infodev@avaya.com