Avaya IX CU360 - Page 19

Procedure
1. Do one of the following:
• On the Avaya IX CU360 endpoint, click Configure > Quick Setup.
• On the web interface, click Basic Settings > Preferences > General.
Avaya IX CU360 displays the Welcome to Avaya CU-360 window.
2. Configure the following fields:
• System Name
• Country
• Language
• Protocol Type
3. Click Next.
Avaya IX CU360 displays the Configure TCP/IP (GLAN) window.
4. Configure the following fields:
• IP Address Mode
• IP Address
• Subnet Mask
• Gateway
• DNS
5. Click Next.
Avaya IX CU360 displays the Configure Gatekeeper window.
6. Configure the following fields:
• Use Gatekeeper
• Mode
• Gatekeeper Address
• E.164
7. Click Next.
Avaya IX CU360 displays the Configure SIP window.
8. Configure the following fields:
• User
• Authentication Name
• Authentication Password
• Use SIP Server
Configuration of Avaya IX CU360 basic settings
March 2019 Using Avaya IX Collaboration Unit CU360 19
Comments on this document? infodev@avaya.com