Chapter 4: Operation
Connecting Avaya IX
™
CU360
About this task
Avaya IX
™
CU360 contains the following standard equipment:
• Endpoint
• Remote control unit with batteries
• HDMI cable
• Power adaptor
• Rubber cap for camera
Procedure
1. Secure the Avaya IX
™
CU360 endpoint on an external monitor using the hinge at the
bottom of the endpoint.
2. Connect the HDMI cable in the HDMI ports of Avaya IX
™
CU360 and the external monitor.
3. Connect the power adaptor.
November 2019 Using Avaya IX Collaboration Unit CU360 22
Comments on this document? infodev@avaya.com
To Next Page
Loading...
