Copying Avaya IX
™
CU360 meeting recordings to a USB
device
About this task
The USB device must be formatted with the FAT32, EXT2, EXT3, or EXT4 file system.
Procedure
1. On the web interface, click More Actions > Recording.
Avaya IX
™
CU360 displays the Recording window.
2. Click Upload Video, and follow the prompts.
Validating Avaya IX
™
CU360 meeting recordings
About this task
Add a digital signature to meeting recordings to validate that the recordings are not tampered.
Avaya IX
™
CU360 validated meeting recordings using existing recording signatures. If the meeting
is recorded using a different signature, you must import the digital signature.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Recording.
• On the web interface, click More Actions > Recording.
Avaya IX
™
CU360 displays the Recording page.
2. Select the meeting recording, and click Verify Signature.
Avaya IX
™
CU360 displays Verify Signature only if the meeting recording and its signature
are available.
Result
Avaya IX
™
CU360 validates the meeting recording and displays a confirmation message.
Removing devices paired using Avaya Screen Link
About this task
Devices connected to Avaya IX
™
CU360 using Avaya Screen Link remain paired until the device
shuts down or users end the connection from the device. You can devices paired Avaya IX
™
CU360 manually.
Operation
November 2019 Using Avaya IX Collaboration Unit CU360 38
Comments on this document? infodev@avaya.com
To Next Page
Loading...
