Avaya IX CU360 - Blocking All Incoming Calls in Avaya IX0 CU360

Procedure
1.
Click .
Avaya IX
™
CU360 displays the options available during meetings.
2. Click Present.
Avaya IX
™
CU360 displays the Presentation window.
3. Select one of the following options to share:
• Whiteboard
• Apps
• Screen Link
• USB
Blocking all incoming calls in Avaya IX
™
CU360
About this task
Configure Avaya IX
™
CU360 to block all incoming calls by enabling the Do Not Disturb feature.
When this feature is enabled, Avaya IX
™
CU360:
• Blocking all incoming call notifications.
• Automatically disconnects all incoming calls and sends a message to remote endpoints that
Avaya IX
™
CU360 is unavailable.
Procedure
1. Do one of the following:
• From the endpoint, click Configure > Calling.
• From the web interface, click Basic Settings > Call-Answer mode > General.
2. Configure the following fields:
• Do Not Disturb: Yes
• DnD Mode: All
3. On the web interface, click Save.
Blocking all incoming calls in Avaya IX
™
CU360
November 2019 Using Avaya IX Collaboration Unit CU360 35
Comments on this document? infodev@avaya.com