Avaya IX CU360 - CU360 Meetings Using Recently Called Contacts

Before you begin
Verify that Avaya IX
™
CU360:
• Supports dialing to external endpoints.
• Calls are encrypted. Avaya IX
™
CU360 displays a padlock icon on the screen when calls are
encrypted. Check with your system administrator whether call encryption is configured.
Important:
Using encryption is subject to local regulations. In some countries it is restricted or limited for
usage. For more information, consult your local reseller.
Procedure
1. Do one of the following:
• On the web interface, click Make your Call > Basic Options > Direct Call.
• On the endpoint main menu, click Call
Avaya IX
™
CU360 displays the Call page.
2. Enter the dial string.
Dial strings can be another endpoint’s number, an H.323 alias such as john_smith, or a
URI address such as john@company.com.
3. Click Call.
Starting Avaya IX
™
CU360 meetings using recently called
contacts
About this task
Your enterprise might have implemented a dial plan that defines different dial prefixes to determine
specific calls. For example, dialing 8 to start a low-bandwidth video conference or dialing 6 to start
an audio-only call. For more information about the dial plan, contact your system administrator.
Note:
If your system administrator configured a time limit for video conferences, Avaya IX
™
CU360
displays a warning when the time limit expires. You can ignore the warning and let the video
conference end in five minutes, or you can snooze the warning and extend the video
conference by 30 minutes.
Before you begin
Verify that Avaya IX
™
CU360:
• Supports dialing to external endpoints.
• Calls are encrypted. Avaya IX
™
CU360 displays a padlock icon on the screen when calls are
encrypted. Check with your system administrator whether call encryption is configured.
Starting Avaya IX
™
CU360 meetings using recently called contacts
November 2019 Using Avaya IX Collaboration Unit CU360 25
Comments on this document? infodev@avaya.com