• On the endpoint main menu, click Configure.
2. Do one of the following:
• On the web interface, click System > Customization.
• On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configured a PIN to gain access to the advanced settings on the
endpoint, Avaya IX
™
CU360 prompts you to enter PIN. After you enter PIN, Avaya IX
™
CU360 displays the Advanced window.
3. On the endpoint, click System > Customization.
4. Select Yes for Hide Floating Bar.
Customization
November 2019 Using Avaya IX Collaboration Unit CU360 42
Comments on this document? infodev@avaya.com
To Next Page
Loading...
