Parameter name Default
value
Description
Valid values are 10 through 36000.
REDIRECT_TONE 1 Specifies the tone to play when a
call goes to coverage.
Valid values are from 1 to 4.
REGISTERWAIT 900 Specifies the number of seconds
between re-registrations with the
current server. Valid values are
from 30 to 86400.
REUSETIME 60 Specifies the number of seconds
that the DHCP is attempted:
• With a VLAN ID of zero. True
when L2Q is set to 1.
• Or with untagged frames. True if
L2Q is set to 0 or 2.
• And before reusing the IP
address and the associated
address information, that the
phone had the last time it
successfully registered with a call
server.
While reusing an address, DHCP
enters the extended rebinding state
described above for DHCPSTD.
Valid values are 0 and 20 through
999. The default value is 60. A
value of zero means that DHCP will
try forever and there will be no
reuse.
RINGTONES
Null Specifies a list of display names
and file names or URLs for a
custom ring tone files to be
downloaded and offered to users.
The list can contain 0 to 1023
UTF-8 characters. The default
value is null.
Values are separated by commas
without any intervening spaces.
Each value consists of a display
name followed by an equals sign
followed by a file name or URL.
Display names can contain spaces,
but if any do, the entire list must be
Table continues…
List of configuration parameters
December 2018 Installing and Administering Avaya J100 Series IP Phones 253
Comments on this document? infodev@avaya.com
To Next Page
Loading...
