Parameter name Default
value
Description
quoted. Ring tone files must be
single-channel WAV files coded in
ITU-T G.711 u-law or A-law PCM
with 8-bit samples at 8kHz.
RINGTONES_UPDATE 0 Specifies if the phone queries the
file server to determine if there is an
updated version of each custom
ring tone file each time the phone
starts up or resets.
Value Operation:
• 0: Phone only tries to download
ring tones with new display
names.
• 1: Phone checks for updated
version of each ring tone file at
startup.
RINGTONESTYLE 0 Specifies the style of ring tones that
are offered to the user for
personalized ringing when Classic
is selected, as opposed to Rich.
Value Operation:
• 0: North American ring tones are
offered (default).
• 1: European ring tones are
offered.
RTCP_XR 0 Specifies if VoIP Metrics Report
Block as defined in RTP Control
Protocol Extended Reports (RTCP
XR) (RFC 3611) is sent as part of
the RTCP packets to remote peer
or to RTCP monitoring server.
Value Operation:
• 0: No
• 1: Yes
RTCPCONT Specifies if the sending of RTCP is
enabled.
Value Operation:
• 0: No
• 1: Yes
Table continues…
Appendix
December 2018 Installing and Administering Avaya J100 Series IP Phones 254
Comments on this document? infodev@avaya.com
To Next Page
Loading...
